Участник:RiF

Раздел
Машинное отделение
Глава департамента Главный Инженер
Экипаж
Старший инженер Инженер Информационный техник Инженер-стажёр
Руководства
Руководство Инженера Конструирование Взлом Солнечные Панели Атмосфера ВКД Суперматерия R-UST Роботехника Подстанции Телекоммуникации ИКС Двигатели
Локации Engineering

Materials

Materials
Construction	Materials	Tools	Method
Steel	1x Hematite, 1x Coal	Mineral Processor	Alloy both minerals in the mineral processor.
Plasteel	2x Steel, 1x Platinum	Mineral Processor	Alloy both minerals in the mineral processor
osmium-carbide plasteel	5x plasteel, 3x osmium	Mineral Processor	Alloy both minerals in the mineral processor
Plastic	1xCoal	Mineral Processor	Smelt in the mineral processor.
Aluminum	1x bauxite	Mineral Processor	Smelt in the mineral processor.
Glass	1x Sand	Mineral Processor	Smelt in the mineral processor
Borosilicate Glass	1x Platinum 2x Sand	Mineral Processor	Alloy both minerals in the mineral processor
Plank	Towercap	Hydroponics tray Hatchet	1. Grow towercap at a hydroponics tray 2. use hatchet on Towercap to create logs 3. use hatchet on logs create planks
Rods (2x)	1x Metal		Use metal and click "2x metal rods"
Floor Tiles (4x)	1x Metal		Use metal and click "4x floor tiles"
Reinforced Glass	1x rods, 1x glass		Use rods on glass.

Floors

Floors
Construction	Materials	Tools	Method
Lattice	1x Rod	Welding tool	развернуть Construction With rods in hand, click on empty space tile. Used as a basis for plating. развернуть Deconstruction Use a welder to deconstruct the lattice into a rod.
Catwalk	1x		развернуть Construction With rods in hand, click on lattice or plating. Used as a more permanent structure over open spaces or to leave underfloor piping and wiring visible. развернуть Deconstruction Use a welder to deconstruct the catwalk into a rod.
Plating	1x Regular floortile	Welding tool Crowbar	развернуть Construction Use a regular floortile on lattice. Blocks air and can be used for further construction. развернуть Deconstruction Use welder on the plating. Use crowbar on the plating to deconstruct into a floor tile. развернуть Repair Use a welder to repair the plating
Floor	1x any floor tile	Crowbar	развернуть Construction Use any floortile on plating. Floor tiles cover up wires and pipes. You can also construct wooden and other floors the same way. развернуть Deconstruction Use a crowbar on the floor tile.
Floor Light	312 steel, 312 glass in autolathe	Screwdriver Autolathe	Created in the autolathe then dragged to a plating, use screwdriver to secure.

Walls

Walls
Construction	Requires	Tools
Файл:Wall new.png Regular Wall	4x OR 2x and any 2x stacked material.		развернуть Construction Use metal to make wall girders. or use metal or plasteel on the girders to make the wall. развернуть Deconstruction Welder. Wrench the remaining girder.
Reinforced Wall	2x , 4x OR 2xany 4x stacked material,		развернуть Construction Use metal to make wall girders. or use metal or plasteel on the girders to make the wall. Screwdriver girder to enable reinforcement. or use metal or plasteel to reinforce the girders. Does not effect final wall strength. or use metal or plasteel to finish the wall. Does effect final wall strength. развернуть Deconstruction Wirecutters. Screwdriver. Welder. Crowbar. Wrench. Welder. Crowbar. Screwdriver. Wirecutters. Wrench the remaining girder.
Файл:GrilleNew.png Grille	2x		развернуть Construction Use rods to create a grille. развернуть Deconstruction Wirecut to dissassemble. развернуть Extra You can place a powered wire underneath to electrify the grille. You can wrench the grille to unanchor or reanchor it so it can be moved.
Low Wall	2x , 4x , 2x		развернуть Construction Use metal sheets to create the low wall. Use rods on the low wall to add a grille. Use glass on the low wall to add a window. Screw the window into place. Pry the window into the frame. Screw the window into the frame. развернуть Deconstruction Unscrew the window from the frame. Pry the window out of the frame. Unscrew the window from the frame. Deconstruct the window. Cut the grilles. Deconstruct the low wall. развернуть Extra You can place a powered wire underneath to electrify the grille. You can wrench the grille to unanchor or reanchor it so it can be moved.

Glass

Glass
Construction	Requires
Glass Panel	1x,	Click on the glass sheet, select one directional. Right-click the panel to rotate. Use screwdriver to complete construction. You can also left-click a grille with the glass sheet to place directly on the grille.
Файл:Glass full.png Full Glass	2x,	Click on the glass sheet, select full. Use screwdriver to complete construction.
Файл:Glass panelr.png Reinforced Glass Panel	1x,,	Click on the glass sheet, select one directional. Right-click the panel to rotate. Use the following sequence to complete construction: Screwdriver , Crowbar, Screwdriver. Reverse to deconstruct. You can also left-click a grille with the glass sheet to place directly on the grille.
Файл:Glass fulllr.png Reinforced Full Glass	2x,,	Click on the glass sheet, select full. Use the following sequence to complete construction: Screwdriver , Crowbar, Screwdriver. Reverse to deconstruct.

Airlocks & Doors

Airlocks & Doors
Construction	Requires
Airlock	4x ,1x,,,,	развернуть Construction Use metal to make an airlock assembly. Wrench airlock assembly in place. (Optional) Use a pen to name the airlock. (Optional) Add reinforced glass to make a glass airlock. Add wires to assembly. Unlock the airlock control board with an ID card, and use it in hand to set the access levels. Add airlock control board to assembly. Screwdriver to finish. развернуть Deconstruction Screwdriver the door. Use multitool and wirecutters to disable everything except the doorbolts as detailed here. Doorbolts must be up for this to work. Weld the door shut. Crowbar the electronics out. (if the door is electrified, this won't work for some reason) Wirecut the wires out. Unsecure it with a wrench. Weld it to deconstruct to metal plates.
Emergency Shutter	4x ,,,	развернуть Construction Use metal to make an airlock assembly. Wrench airlock assembly in place. Add wires to assembly. Add air alarm circuit board to assembly. развернуть Deconstruction Screwdriver the shutter to open it's hatch. Weld the shutter closed. Crowbar the Electronics out. Wrench the shutter assembly to unsecure it. Weld the unsecured assembly to disassemble it into sheets of metal.
Window Door	5x,4x ,,,,,	развернуть Construction Click on reinforced glass and click "windoor." Use a wrench to secure. (Optional) Add rods to make a secure windoor Add wires Unlock the airlock control board with an ID card, and use it in hand to set the access levels. Add airlock control board to assembly. Use a crowbar to finish the assembly.
Regular Hidden Door	4x ,	Use metal and create a wall girder. Use a crowbar on the girder, then place the rest of the metal. You can also deconstruct a wall to the girder state, then start this construction to turn an existing wall into a hidden door.
Reinforced Hidden Door	2x ,2x ,	Use metal and create a wall girder. Use a crowbar on the girder, then place the reinforced metal.

Wall Mountings

Wall Mountings
Construction	Requires
APC	2x,,,,,,	развернуть Construction Use metal to make an APC frame and use the frame on the wall you want it on. Add wire to the assembly. Add power control module to the assembly. Screwdriver the assembly. Add powercell to assembly. Use crowbar to shut. Use an ID card to open the APC and turn the main beaker on. развернуть Deconstruction Swipe card to unlock APC Remove the power cell. Screwdriver the assembly. Lift the floorboards in front of the APC. Wirecut the assembly. Crowbar the assembly to remove the control. Use the welder to remove the APC from the wall. (Optional) Wrench the frame to remove it.
Air Alarm	2x,,,	развернуть Construction Use metal to make an air alarm frame and use the frame on the wall you want it on. Insert the air alarm electronics to the assembly. Wire the assembly. Screwdriver to complete. развернуть Deconstruction Open the cover. Wirecut the assembly. Pry out the circuit. Remove the air alarm from the wall.
Fire Alarm	2x,,,	развернуть Construction Use the metal and make an air alarm frame. Use the frame on the wall you want it on. Put in the electronics. Wire with cables. Screwdriver to close. развернуть Deconstruction Open the cover. Wirecut the assembly. Pry out the circuit. Remove the air alarm from the wall.
Light Fixture	2x,,	развернуть Construction Use metal to make an light fixture frame or small light fixture frame and use the frame on the wall you want it on. Wire the assembly. Screwdriver to complete. Add a light tube for large frame or a lightbulb for small frame.
Security Camera	Camera Assembly,,,,	развернуть Construction Drop the camera assembly infront of the wall you would like it to be. Wrench the camera assembly. Weld the camera into place. Add the wiring. (Optional) Add any additional upgrades. Screwdriver to complete and set networks / direction.
Wall-mounted Sign		Use screwdriver to place on wall or remove.

Misc

Misc
Construction	Requires
Non-Modular Computer	5x , 2x , , , ,	развернуть Construction Use the metal and create the computer frame. Wrench in place. Insert computer circuitboard of your choice. Use the screwdriver on assembly. Insert wires to assembly. Insert glass to assembly. Screwdriver to complete the construction. развернуть Deconstruction Screwdriver to detach the screen. Crowbar to pry off the screen. Wirecutters to cut the cables. Screwdriver to detach the circuit lid. Crowbar to pry out the circuit. Wrench to detach the frame. Welder to disassemble the frame.
Modular Computer	20x/15x/10x/5x , Components	развернуть Construction Use the metal and create the modular computer frame. Consoles require 20 metal. Telescreens require 15 metal. Laptops require 10 metal. Tablets require 5 metal. Add the required components. These can be found in Tech Storage, printed from the Protolathe, or yanked out of existing computers. Processing Module Hard Disk Tesla Relay or Device Power Cell (Recommended) Networking Card (Optional) RFID Scanner, Nano Printer, etc. развернуть Deconstruction Screwdriver repeatedly to remove all the components. Wrench to dismantle the computer frame.
Turrets	7x , , , , ,	развернуть Construction Use the metal and create the turret frame. Wrench in place. Use metal on the assembly to add a cover. Use wrench on the cover to secure. Add a energy weapon to the assembly. Add a proximity sensor to the assembly. Screwdriver to secure. Add more metal to the frame. Weld to complete the construction.
Disposal Pipes and Machinery	Disposal Dispenser, , ,	развернуть Construction Retrieve the pipe or machinery from the disposal dispenser. Crowbar any floor tiles that may be in the way. Move pipe onto plating, you can rotate the pipe using right-click. Wrench into place. Weld to complete. To deconstruct pipes, welder, wrench. To deconstruct machines, use a screwdriver. Шаблон:Patrolled