Участник:RiF

Материал из Infinity Project
Перейти к навигации Перейти к поиску


Materials

Materials
Construction Materials Tools Method
Metal.pngSteel 1x Ironore.pngHematite, 1x Coalore.pngCoal Mineral Processor Alloy both minerals in the mineral processor.
Plasteel 2x Steel, 1x Platinum Mineral Processor Alloy both minerals in the mineral processor
osmium-carbide plasteel 5x plasteel, 3x osmium Mineral Processor Alloy both minerals in the mineral processor
Plastic 1xCoalore.pngCoal Mineral Processor Smelt in the mineral processor.
Aluminum 1x bauxite Mineral Processor Smelt in the mineral processor.
Glass.pngGlass 1x Sand Mineral Processor Smelt in the mineral processor
Borosilicate Glass 1x Platinum 2x Sand Mineral Processor Alloy both minerals in the mineral processor
Plank Towercap Hydroponics tray

Hatchet

1. Grow towercap at a hydroponics tray

2. use hatchet on Towercap to create logs

3. use hatchet on logs create planks

Rods.png Rods (2x) 1x Metal.pngMetal Use metal and click "2x metal rods"
Floor Tiles.png Floor Tiles (4x) 1x Metal.pngMetal Use metal and click "4x floor tiles"
Glass r.png Reinforced Glass 1x Rods.pngrods, 1x Glass.pngglass Use rods on glass.

Floors

Floors
Construction Materials Tools Method
Lattice.png Lattice 1x Rods.pngRod Welder.gifWelding tool
Construction



  1. With rods in hand, click on empty space tile.
Used as a basis for plating.
Deconstruction



  1. Use a welder to deconstruct the lattice into a rod.


Catwalk1.jpg Catwalk 1x Rods.png
Construction



  1. With rods in hand, click on lattice or plating.
Used as a more permanent structure over open spaces or to leave underfloor piping and wiring visible.
Deconstruction



  1. Use a welder to deconstruct the catwalk into a rod.


Plating.png Plating 1x Floor Tiles.pngRegular floortile Welder.gif Welding tool

Crowbar.png Crowbar

Construction



  1. Floor Tiles.png Use a regular floortile on lattice.

Blocks air and can be used for further construction.

Deconstruction



  1. Use welder on the plating.
  2. Use crowbar on the plating to deconstruct into a floor tile.
Repair



  1. Use a welder to repair the plating


Floor.png Floor 1x Floor Tiles.pngany floor tile Crowbar
Construction



  1. Use any floortile on plating.

Floor tiles cover up wires and pipes.

You can also construct wooden and other floors the same way.
Deconstruction



  1. Use a crowbar on the floor tile.


LightFloor.gif Floor Light 312 steel, 312 glass in autolathe Screwdriver tool.pngScrewdriver

Autolathe n.gif Autolathe

Created in the autolathe then dragged to a plating, use screwdriver to secure.

Walls

Walls
Construction Requires Tools
Файл:Wall new.png Regular Wall 4x Metal.png

OR

2x Metal.png and any 2x stacked material.

Construction



  1. Metal.png Use metal to make wall girders.
  2. Metal.png or Metal r.png use metal or plasteel on the girders to make the wall.
Deconstruction



  1. Welder.gif Welder.
  2. Wrench.png Wrench the remaining girder.


Armored wall.png Reinforced Wall 2x Metal.png, 4x Metal r.png

OR

2xMetal.pngany 4x stacked material,

Construction



  1. Metal.png Use metal to make wall girders.
  2. Metal.png or Metal r.png use metal or plasteel on the girders to make the wall.
  3. Screwdriver tool.png Screwdriver girder to enable reinforcement.
  4. Metal.png or Metal r.png use metal or plasteel to reinforce the girders. Does not effect final wall strength.
  5. Metal.png or Metal r.png use metal or plasteel to finish the wall. Does effect final wall strength.
Deconstruction



  1. Wirecutters.png Wirecutters.
  2. Screwdriver tool.png Screwdriver.
  3. Welder.gif Welder.
  4. Crowbar.png Crowbar.
  5. Wrench.png Wrench.
  6. Welder.gif Welder.
  7. Crowbar.png Crowbar.
  8. Screwdriver tool.png Screwdriver.
  9. Wirecutters.png Wirecutters.
  10. Wrench.png Wrench the remaining girder.


Файл:GrilleNew.png Grille 2x Rods.png
Construction



  1. Rods.png Use rods to create a grille.
Deconstruction



  1. Wirecutters.png Wirecut to dissassemble.
Extra



  • CableCoils.png You can place a powered wire underneath to electrify the grille.
  • Wrench.png You can wrench the grille to unanchor or reanchor it so it can be moved.


Frame.png Low Wall 2x Metal.png, 4x Glass r.png, 2x Rods.png
Construction



  1. Metal.png Use metal sheets to create the low wall.
  2. Rods.png Use rods on the low wall to add a grille.
  3. Glass r.png Use glass on the low wall to add a window.
  4. Screwdriver tool.png Screw the window into place.
  5. Crowbar.png Pry the window into the frame.
  6. Screwdriver tool.png Screw the window into the frame.
Deconstruction



  1. Screwdriver tool.png Unscrew the window from the frame.
  2. Crowbar.png Pry the window out of the frame.
  3. Screwdriver tool.png Unscrew the window from the frame.
  4. Wrench.png Deconstruct the window.
  5. Wirecutters.png Cut the grilles.
  6. Wrench.png Deconstruct the low wall.
Extra



  • CableCoils.png You can place a powered wire underneath to electrify the grille.
  • Wrench.png You can wrench the grille to unanchor or reanchor it so it can be moved.


Glass

Glass
Construction Requires
Glass panel.png Glass Panel 1xGlass.png,Screwdriver tool.png Click on the glass sheet, select one directional. Right-click the panel to rotate. Use screwdriver to complete construction. You can also left-click a grille with the glass sheet to place directly on the grille.
Файл:Glass full.png Full Glass 2xGlass.png,Screwdriver tool.png Click on the glass sheet, select full. Use screwdriver to complete construction.
Файл:Glass panelr.png Reinforced Glass Panel 1xGlass r.png,Screwdriver tool.png,Crowbar.png Click on the glass sheet, select one directional. Right-click the panel to rotate. Use the following sequence to complete construction:

Screwdriver tool.png Screwdriver , Crowbar.png Crowbar, Screwdriver tool.png Screwdriver. Reverse to deconstruct.

You can also left-click a grille with the glass sheet to place directly on the grille.

Файл:Glass fulllr.png Reinforced Full Glass 2xGlass r.png,Screwdriver tool.png,Crowbar.png Click on the glass sheet, select full. Use the following sequence to complete construction:

Screwdriver tool.png Screwdriver , Crowbar.png Crowbar, Screwdriver tool.png Screwdriver. Reverse to deconstruct.

Airlocks & Doors

Airlocks & Doors
Construction Requires
Airlock.png Airlock 4x Metal.png,1xGlass r.png,Screwdriver tool.png,Wrench.png,CableCoils.png,Circuitboard.png
Construction



  1. Metal.png Use metal to make an airlock assembly.
  2. Wrench.png Wrench airlock assembly in place.
  3. (Optional) Use a pen to name the airlock.
  4. (Optional) Glass r.png Add reinforced glass to make a glass airlock.
  5. CableCoils.png Add wires to assembly.
  6. Circuitboard.png Unlock the airlock control board with an ID card, and use it in hand to set the access levels.
  7. Circuitboard.png Add airlock control board to assembly.
  8. Screwdriver tool.png Screwdriver to finish.
Deconstruction



  1. Screwdriver tool.png Screwdriver the door.
  2. Use multitool and wirecutters to disable everything except the doorbolts as detailed here. Doorbolts must be up for this to work.
  3. Welder.gif Weld the door shut.
  4. Crowbar.png Crowbar the electronics out. (if the door is electrified, this won't work for some reason)
  5. Wirecutters.png Wirecut the wires out.
  6. Wrench.png Unsecure it with a wrench.
  7. Welder.gif Weld it to deconstruct to metal plates.


Файл:Hazard airlock.png Emergency Shutter 4x Metal.png,Wrench.png,CableCoils.png,Circuitboard.png
Construction



  1. Metal.png Use metal to make an airlock assembly.
  2. Wrench.png Wrench airlock assembly in place.
  3. CableCoils.png Add wires to assembly.
  4. Circuitboard.png Add air alarm circuit board to assembly.
Deconstruction



  1. Screwdriver tool.png Screwdriver the shutter to open it's hatch.
  2. Welder.gif Weld the shutter closed.
  3. Crowbar.png Crowbar the Electronics out.
  4. Wrench.png Wrench the shutter assembly to unsecure it.
  5. Welder.gif Weld the unsecured assembly to disassemble it into sheets of metal.


Файл:Windoor.png Window Door 5xGlass r.png,4x Rods.png,Wrench.png,CableCoils.png,Screwdriver tool.png,Crowbar.png,Circuitboard.png
Construction



  1. Glass r.png Click on reinforced glass and click "windoor."
  2. Wrench.png Use a wrench to secure.
  3. Rods.png (Optional) Add rods to make a secure windoor
  4. CableCoils.png Add wires
  5. Circuitboard.png Unlock the airlock control board with an ID card, and use it in hand to set the access levels.
  6. Circuitboard.png Add airlock control board to assembly.
  7. Crowbar.png Use a crowbar to finish the assembly.


Файл:False wall.gif Regular Hidden Door 4x Metal.png, Crowbar.png Use metal and create a wall girder. Use a crowbar on the girder, then place the rest of the metal.

You can also deconstruct a wall to the girder state, then start this construction to turn an existing wall into a hidden door.

Файл:False wallr.gif Reinforced Hidden Door 2x Metal.png,2x Metal r.png, Crowbar.png Use metal and create a wall girder. Use a crowbar on the girder, then place the reinforced metal.

Wall Mountings

Wall Mountings
Construction Requires
Apc.gif APC 2xMetal.png,Powercell.png,Wrench.png,CableCoils.png,Screwdriver tool.png,Crowbar.png,Circuitboard.png
Construction



  1. Metal.png Use metal to make an APC frame and use the frame on the wall you want it on.
  2. CableCoils.png Add wire to the assembly.
  3. Circuitboard.png Add power control module to the assembly.
  4. Screwdriver tool.png Screwdriver the assembly.
  5. Powercell.png Add powercell to assembly.
  6. Crowbar.png Use crowbar to shut.
  7. Use an ID card to open the APC and turn the main beaker on.
Deconstruction



  1. Swipe card to unlock APC
  2. Remove the power cell.
  3. Screwdriver tool.png Screwdriver the assembly.
  4. Crowbar.png Lift the floorboards in front of the APC.
  5. Wirecutters.png Wirecut the assembly.
  6. Crowbar.png Crowbar the assembly to remove the control.
  7. Welder.gif Use the welder to remove the APC from the wall.
  8. (Optional) Wrench the frame to remove it.


Alarm0.gif Air Alarm 2xMetal.png,CableCoils.png,Screwdriver tool.png,Circuitboard.png
Construction



  1. Metal.png Use metal to make an air alarm frame and use the frame on the wall you want it on.
  2. Circuitboard.png Insert the air alarm electronics to the assembly.
  3. CableCoils.png Wire the assembly.
  4. Screwdriver tool.png Screwdriver to complete.
Deconstruction



  1. Screwdriver tool.png Open the cover.
  2. Wirecutters.png Wirecut the assembly.
  3. Crowbar.png Pry out the circuit.
  4. Wrench.png Remove the air alarm from the wall.


Fire0.png Fire Alarm 2xMetal.png,CableCoils.png,Screwdriver tool.png,Circuitboard.png
Construction



  1. Metal.png Use the metal and make an air alarm frame.
  2. Use the frame on the wall you want it on.
  3. Circuitboard.png Put in the electronics.
  4. CableCoils.png Wire with cables.
  5. Screwdriver tool.png Screwdriver to close.
Deconstruction



  1. Screwdriver tool.png Open the cover.
  2. Wirecutters.png Wirecut the assembly.
  3. Crowbar.png Pry out the circuit.
  4. Wrench.png Remove the air alarm from the wall.


Lightfixture.png Light Fixture 2xMetal.png,CableCoils.png,Screwdriver tool.png
Construction



  1. Metal.png Use metal to make an light fixture frame or small light fixture frame and use the frame on the wall you want it on.
  2. CableCoils.png Wire the assembly.
  3. Screwdriver tool.png Screwdriver to complete.
  4. Add a light tube for large frame or a lightbulb for small frame.


Security Camera.gif Security Camera Camera Assembly,CableCoils.png,Screwdriver tool.png,Wrench.png,Welder.gif
Construction



  1. Drop the camera assembly infront of the wall you would like it to be.
  2. Wrench.png Wrench the camera assembly.
  3. Welder.gif Weld the camera into place.
  4. CableCoils.png Add the wiring.
  5. (Optional) Add any additional upgrades.
  6. Screwdriver tool.png Screwdriver to complete and set networks / direction.


Decal warning.png Wall-mounted Sign Screwdriver tool.png Use screwdriver to place on wall or remove.

Misc

Misc
Construction Requires
Solar console.gif Non-Modular Computer 5x Metal.png, 2x Glass.png, CableCoils.png, Wrench.png, Screwdriver tool.png, Circuitboard.png
Construction



  1. Metal.png Use the metal and create the computer frame.
  2. Wrench.png Wrench in place.
  3. Circuitboard.png Insert computer circuitboard of your choice.
  4. Screwdriver tool.png Use the screwdriver on assembly.
  5. CableCoils.png Insert wires to assembly.
  6. Glass.png Insert glass to assembly.
  7. Screwdriver tool.png Screwdriver to complete the construction.
Deconstruction



  1. Screwdriver tool.png Screwdriver to detach the screen.
  2. Crowbar.png Crowbar to pry off the screen.
  3. Wirecutters.png Wirecutters to cut the cables.
  4. Screwdriver tool.png Screwdriver to detach the circuit lid.
  5. Crowbar.png Crowbar to pry out the circuit.
  6. Wrench.png Wrench to detach the frame.
  7. Welder.gif Welder to disassemble the frame.


Modular computer off.png Modular Computer 20x/15x/10x/5x Metal.png, Components
Construction



  1. Metal.png Use the metal and create the modular computer frame.
    1. Consoles require 20 metal.
    2. Telescreens require 15 metal.
    3. Laptops require 10 metal.
    4. Tablets require 5 metal.
  2. Add the required components. These can be found in Tech Storage, printed from the Protolathe, or yanked out of existing computers.
    1. Processing Module
    2. Hard Disk
    3. Tesla Relay or Device Power Cell
    4. (Recommended) Networking Card
    5. (Optional) RFID Scanner, Nano Printer, etc.
Deconstruction



  1. Screwdriver tool.png Screwdriver repeatedly to remove all the components.
  2. Wrench.png Wrench to dismantle the computer frame.


Turret.PNG Turrets 7x Metal.png, Screwdriver tool.png, Welder.gif, Wrench.png, Smartgun.png,Prox Sensor.png
Construction



  1. Metal.png Use the metal and create the turret frame.
  2. Wrench.png Wrench in place.
  3. Metal.png Use metal on the assembly to add a cover.
  4. Wrench.png Use wrench on the cover to secure.
  5. Smartgun.png Add a energy weapon to the assembly.
  6. Prox Sensor.png Add a proximity sensor to the assembly.
  7. Screwdriver tool.png Screwdriver to secure.
  8. Metal.png Add more metal to the frame.
  9. Welder.gif Weld to complete the construction.


Disposal.png Disposal Pipes and Machinery Disposal Dispenser, Crowbar.png, Welder.gif, Wrench.png
Construction



  1. Retrieve the pipe or machinery from the disposal dispenser.
  2. Crowbar.png Crowbar any floor tiles that may be in the way.
  3. Wrench.png Move pipe onto plating, you can rotate the pipe using right-click. Wrench into place.
  4. Welder.gif Weld to complete.


To deconstruct pipes, welder, wrench. To deconstruct machines, use a screwdriver. Шаблон:Patrolled